IEC 60364-4-44 Edition 1.2-2006 建筑物的电力装置.第4-44部分:安全防护.电压干扰和电磁干扰防护

上一篇: ISO/IEC 18023-2-2006 信息技术.SEDRIS语言.第2部分:抽象传输格式
下一篇: ANSI/NEMA MW1000-2006 磁线(包含所有修订版)

Product Code:SAE J1453
Title:Fitting--O-Ring Face Seal (Cancelled Jan 2009, Superseded by J1453/1, J1453/2, J1453/3)
Issuing Committee:Hydraulic Tube Fittings Committee
Scope:This SAE Standard covers material, dimensional, and performance requirements of steel O-ring face seal fittings for tubing and the O-ring face seal interface and nut portion of hose stem assemblies for nominal tube or hose diameters 6.35 mm (0.250 in) through 38.1 mm (1.500 in). These fittings are intended for general application and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These fittings are capable of providing leak-proof full flow connections in hydraulic systems operating from 95 kPa (28 in Hg) vacuum to working pressures shown in Table 1. Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, these values should not be construed as guaranteed minimums. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to assure that required performance levels will be safe. See Figure 1.The rated working pressure of a fluid conductor assembly using SAE J1453 hose stem connections or formed tube connection per Figure 32a, shall not exceed rated working pressure of the lowest rated component thereof.

标准名称：	探井化验项目取样及成果要求
中标分类：	石油 >> 石油勘探、开发与集输 >> 石油地质勘探
发布日期：	1995-01-18
实施日期：	1995-07-01
首发日期：	1900-01-01
作废日期：	1900-01-01
出版日期：	1900-01-01

没有内容

没有内容

没有内容

没有内容